Atlas Glass Repair Co.
The following is a listing of commonly used terms in the glass and window repair business....
Standard float (plate) glass
Has a top hinge that swings outward from the bottom for proper ventilation.
An inert, nontoxic gas used to fill insulating units, thus improving thermal performance.
The use of springs or weights to hold a vertical sash in any desired position.
An arrangement of three or more individual window units, attached in such a way as to project from the building at various angles. In a three unit bay, the center section is normally fixed with the end panels operable as single hung or casements.
Bent glass is a normal glass, which is curved with a special process.
The process by which an edge of glass is finished to a bevel angle.
A piece of neoprene, silicone, or other suitable material used to position the glass in the frame.
A bow window can be arranged with three or more equal width units. They can be fixed or operable or mixed in any combination. They are usually mulled together with a small angle such as 13 degrees.
Designed and produced to resist penetration by bullets.
A synthetic rubber prepared by co-polymerization of isobutylene with a small amount of isoprene (both ingredients are gaseous hydrocarbons). It can be used as a sealant and architectural glazing tape.
Combines with the keeper mechanism to keep the window sashes together when locked.
A window unit in which the single sash cranks outward, to the right or left.
The blocking of exterior air or moisture leaks by filling cracks around doors, windows, or anywhere else where two surfaces meet and have minimum movement with a "putty" compound. Large cracks can be stuffed with mineral wood and weather sealed with caulking
When water vapor, which is present in all but the driest air, comes in contact with a surface that is below what is called the "dew point temperature," the vapor becomes liquid and is called condensation. An example is as follows: condensation forms on a glass of ice water since the surface of the glass is down to the dew point temperature of the inside air.
CONDENSATION RESISTANCE FACTOR:
Measures the effectiveness of a window to reduce condensation. A higher number means better efficiency.
An exterior building wall which carries no roof or floor loads and consists entirely or principally of metal, or a combination of metal, glass and other surfacing materials supported by a metal framework.
Is a piece of glass with a sash around it, but isn't set in the main frame of a window.
Two panes of glass enclosing a hermetically-sealed air space.
A window consisting of two sashes of glass operating in a rectangular frame, both the upper and lower halves can be slid up and down and usually use a counter balance mechanism to hold the sash in place.
A method of securing glass in a frame by use of a dry, preformed resilient gasket, without the use of a compound.
A law requiring a minimum opening of a window for persons to exit or firefighters to enter.
Patterns or designs cut into glass either by acid etching or needle etching techniques.
1. A window which is stationary, also known as a picture window. 2. The part of a sliding window or door which is non-moveable, also known as inactive.
Glass which has its bottom surfaces formed by floating on molten metal, the top surface being gravity formed, producing a high optical quality of glass with parallel surfaces and, without polishing and grinding, the fire-finished brilliance of the finest sheet glass. Float is replacing plate glass.
A method of glazing wherein the surfaces of the glass retaining members (stops or beads) are in the same plane normal to the glass as the side faces of the frame members; often achieved by providing pockets in these faces
A deposit of contamination left on the inside surface of the sealed insulating glass unit due to extremes of temperatures Ultimately resulting in seal failure.
Pre-formed glazing materials used for bedding or securing glass and for separating glass from the frame.
Are specially designed to create rectangles, triangles, half-rounds, full-rounds, ellipses and more.
Buys glass and installs it on a "contractor" basis. Examples: Installing the Window system in large office buildings, shopping center malls, etc.
The work of installing glass in a frame.
A soft dough-like material used for filling and sealing the space between a pane of glass and its surrounding frame.
Is at the top of a window and is the horizontal portion of the main window frame.
Is usually a u-shaped piece of vinyl placed on the head of a window to be used as filler. This piece will expand or lengthen a unit and fill a gap.
Glass which is reheated, after forming, just below melting point and then cooled. A compressed surface is formed which increases its strength. Used for spandrel glass.
HERMETICALLY SEALED UNIT:
An insulating glass unit made up of two lites of glass, separated by a roll formed aluminum spacer tube (at the full perimeter) which is filled with a moisture absorbing material. The unit is then completely sealed, creating a moisture-free, clean dead air space
The pane of a double-glazed unit which faces the interior of a building.
Insulating glass refers to two pieces of glass spaced apart and hermetically sealed to form a single-glazed unit with an air space between. Heat transmission through this type of glass may be as low as half that without such an air space. It is also called Double Glazing.
Glass set from the interior of the building.
Is used around the exterior of a window where the siding fits. It extends beyond the window to the outside edges of an adjoining j-channel.
The jalousie window is made up of horizontally mounted louvered glass that abut each other tightly when closed and extended outward when cranked open.
The vertical parts of the frame on both sides of the window.
Is an odorless and colorless gas that replaces air between two or more glass panes. Krypton is denser than air and works better to deter heat transfers.
Two or more sheets with an inner layer of transparent plastic to which the glass adheres if broken. Used for overhead, safety glazing, and sound reduction..
Another term for a pane of glass used in a window. Frequently spelled "light" in the industry, but spelled "lite" in this text to avoid confusion with light as in "visible light".
The horizontal part of a sash where the cam lock is attached.
Low E coatings are generally neutral in appearance and designed to reduce heat loss through the glass from inside the building. The coating reflects long-wave energy and subsequently reduces the u-value of the glass. Low e coatings may also be incorporated into solar control coatings to provide both benefits of retaining heat in the building and reflecting heat from the sun providing improved energy control
Includes the head, sill, and jambs of a winUM
An intermediate-connecting member used as a means to "join" two or more window products together in a single rough opening.
A small bar that divides window or door glass.
Any type of glass with uneven surfaces which offers light diffusion and privacy.
The pane of double-glazed unit which faces the exterior of a building.
A lite/sheet of glass
Patterned glass presents uneven surfaces with different impressed patterns.
The picture window is stationary and framed so that it is usually, but not always, longer horizontally than vertically to provide a panoramic view.
Polished plate glass is a rolled, ground and polished product with true flat parallel plane surfaces affording excellent vision. It has less surface polish than sheet glass and is available in thickness varying from 1/4" to 1-1/4". Now replaced by float glass.
Means that a unit is vertically level.
Adding or replacing items to existing buildings. Typical retrofit products are replacement doors and windows, insulation, storm windows, caulking, weatherstripping, vents landscaping
VISIIBLE LIGHT TRANSMITTANCE:
Is a percentage of light that is transmitted through glass. The higher the number the higher the percentage of light transmitted through the window.
Creating designs on the surface of glass by using high-pressure air mixed with sand applied to the surface of glass to carve texture.
The portion of a window which incudes the glass and the framing sections which are directly attached to the glass. Not to be confused with the master frame into which the sash sections are fitted.
Narrow fixed units mulled or joined to door units to give a more open appearance.
The use of single thickness of glass in a window or door (as opposed to sealed insulating glass which offers far superior insulating characteristics).
A term used to describe glass with a defined thickness (2.16-2.57 mm).
Window or door with a single glass pane.
Glass which must have passed an impact test and either must not break or must break safely.
A special glass treatment in which sand is sprayed at high velocities over the surface of the glass.
A polymeric organic compound offering excellent resistance to cold, heat and water.
A slider window may have one or two movable panes of glass. Whatever the type, the windows slide horizontally in the frame.
Spandrel glass is the area of glass panels that conceal structural building components such as columns, floor slabs, heating, ventilating and air conditioning (HVAC) systems, electrical wiring, plumbing, etc. often contained within false ceilings on each floor of a building, spandrel glass is typically located between vision glasses on each floor.
The vertical parts of a sash.
Tempered (toughened) glass is two or more times stronger than annealed glass. When broken, it shatters into many small fragments, thus preventing major injuries.
Three panes of glass enclosing two hermetically-sealed air spaces.
A window located directly above a door opening.
Refers to how much heat passes through the glass. The lower the U-value, the better the insulating quality.
Measures the percentage of ultraviolet rays blocked from being transmitted through the glass. The higher the number, the lower the percentage of rays transmitted through the window.
Holding glass in place with extruded vinyl channels or roll-in type.
Uses a silicone-based substance to secure and seal glass to a sash.
Small openings on the exterior sill They are designed to allow water to escape that might otherwise accumulate in a window's sill.
Are holes covered with vinyl to let water escape and keep bugs out.
The pressure acting on an external surface of a building caused by the direct action of the wind.
A metal curtain wall of the commercial type, in which windows are the most prominent element. Also refers to smallest fixed lites used with wall systems.
Is laminated safety glass, similar to what is installed in doors, sidelites, and other safety glass applications.
Polished or clear glass, 1/4" thick. Wire mesh is embedded within the glass such that the glass will not shatter when broken. The wire pattern is available in many types. It is frequently used in skylights, overhead glazing, and locations where a fire-retardant glass is required.
There are many glass companies in Philadelphia Pa, but only one Atlas Glass Repair Company.
A Family Owned Philadelphia Glass Company
© 2018 Atlas Glass Company Philadelphia. All rights reserved
2000 Hamilton Street, Philadelphia Pa 19130